VPN Set Up Guide for Windows Vista
1 - Open the Control Panel from the Start Menu & double click on the Network & Internet Connections item
2 - Under Networking and Sharing Center, Click on "Connect to a Network"
3 - Next, Click on "Set up a connection or Network"
4 - Select the "Connect to a Workplace" item at the bottom of the list and press Next >
5 - You will be asked, how do you want to connect? Select "Use my Internet Connection (VPN)"
6 - In the box labeled Internet address enter IP address provided in e-mail. In the box labeled Destination name enter "Bananavpn", Unselect the first two check boxes and select the box "don't connect now, just set it up so i can connect later" Press Next >
7 - Now enter your Username, password, check "Remember this password" and press Create.
8 - The screen will show, "The connection is Ready to use" Click the "Close" button to return to the "Network and Internet" screen.
9 - In the Network and Internet screen, click on "Connect to a network" again.
10 - In the Connect to a Network screen, you should see the Bananavpn connection that we have set up. Right-click on the Bananavpn connection and choose "Properties" from the menu that appears.
11 - Click on the "Options" tab. Make sure the checkbox labeled "Include Windows logon domain" is NOT checked.
12 - Click on the "Security" tab. The security option should be "Typical", "Require Secured Password" and ONLY check "require data encryption"
13 - Click on the "Networking" tab. In the list of items that you see, make sure that only the "Internet Protocol Version 4(TCP/IPv4)" and "Client for Microsoft Networks" items are checked. If other protocols are checked, uncheck them by clicking on the checkbox.
****************************************
To use L2tp/Ipsec , go the Networking Tab of the VPN properties and change the "Type of VPN" , then click "IPsec Settings" and enter the pre-shared key: secureserver
UK VPN 
USA VPN
German VPN: 
SSTP:
New VPN for Windows Vista & 7 (UK, CA, DE)
